Evergreen ISO17357 Trelleborg 3.3X6.5 Air Pneumatic Inflatable Rubber Fender

• Customization: Available
• After-sales Service: 100% After Sale Service
• Warranty: 18months
• Model NO.: pneumatic fender
• Material: Rubber
• Shape: Cylindrical
• Structure: Floating
• Size: 2.5*5.5m
• Accessories: Free
• Type: Sling Type/Net Type
• Thickness: More Than 18mm
• Synthetic Tyre Cord: with High Breaking Strength
• Certificates: BV, CCS, ABS, Lr
• Transport Package: Bracket
• Specification: Dia2.0mxEL3.5m
• Trademark: Evergreen
• Origin: China
• HS Code: 40169400
• Production Capacity: 300PCS/Month

Product Description

EVERGREEN MARITIME FLOATING MARINE FENDER 
17 years manfuacturer for pneumatic fender. 
Top 1 manfuactures in China
Clients from more than 40 countries and areas.

Pneumatic Rubber Fenders

Floating Pneumatic Rubber Fenders which is made of synthetic-cord-reinforced rubber sheet with compressed air inside to enable it to float on the water and work as a shock absorber between two ships (ship-to-ship), or between ships and berthing structures when they come alongside each other on the water.

Note: The floating pneumatic rubber fenders have sometimes been colloquially referred to as "Yokohama Fenders" or "Yokohama type fenders" - ISO 17357:2002 Ships and marine technology - High-pressure floating pneumatic rubber fenders.

Advantages of Floating Pneumatic Rubber Fenders

Floating pneumatic rubber fenders can be easily handled and installed with guy-rope or guy-chain because of its light weight. It can resist the shearing force and maintain energy absorption level under inclined compressionup to 15 degrees. Meanwhile, provide the low and comparatively even hull pressure.

Consisted of several synthetic-cord layers and tough abrasion resistant out rubber, they have consistent performance even under rough condition and cyclic load. The maintenance cost and damage risk are minimised too. The best material also ensure the self-buoyancy and extremely long service life.
 

Floating Pneumatic Rubber Fenders Requirements

Construction features

Floating pneumatic rubber fenders shall consist of an out rubber, reinforcement synthetic-tyre-cord layer, and inner rubber, vulcanized firmly.

  The out rubber are used to protect the cord layers and inner rubber from abrasion and other external forces. This rubber compound have sufficient tensile and tear resistance strength to withstand anticipated weather conditions and severe usage.
 The reinforcement synthetic-tyre-cord layer strong enough to maintain the internal air pressure of the fender
The inner rubber layer seals the pressurized air inside the fender
 Fenders of diameter 2500mm and larger equipped with safety valve for releasing excess internal pressure when the fenders are over-compressed accidentally.

The properties requirements of outer and inner rubber material of floating pneumatic rubber fenders comply with ISO 17357:2014.

Performace table for P50 & P80 Pneumatic Fenders

Nominal size mm	Pneumatic 50 Guaranteed energy absorption (KN.M)	Pneumatic 50 Reaction force at GEA deflection (KN)	Pneumatic 50 Hull pressure at GEA deflection (KN)	Pneumatic 80 Guaranteed energy absorption (KN.M)	Pneumatic 80 Reactionforce at GEA deflection (KN)	Pneumatic 80 Hull pressureat GEA deflection (KN)
Dia x Length	60% deflection	Tolerance ±10%		60% deflection	Tolerance ±10%
500×1000	6	64	132	8	85	174
600×1000	8	74	126	11	98	166
700×1500	17	137	135	24	180	177
1000×1500	32	182	122	45	239	160
1000×2000	45	257	132	63	338	174
1200×2000	63	297	126	88	390	166
1350×2500	102	427	130	142	561	170
1500×3000	153	579	132	214	761	174
1700×3000	191	639	128	267	840	168
2000×3500	308	875	128	430	1150	168
2500×5000	663	1381	137	925	1815	180
2500×5500	943	2019	148	1317	2653	195
3300×4500	1175	1884	130	1640	2476	171
3300×6500	1814	3015	146	2532	3961	191

Remarks:

•  Initial pressure 0.05Mpa.
• Tolerance between Reation force & Energy absorption: ±10%
• Weight Tolerance: ±10%
• Special dimensions can be customized.
• All the Fittings are Hot-galvanized and Antirust Treatment.