Product Description
Yokohama Pneumatic Fenders
Evergreen Maritime Yokohama Pneumatic Fenders is Yokohama Type Pneumatic Fenders in the true sense.
According to ISO 17357: 2002, the floating pneumatic rubber fenders have sometimes been colloquially referred to as "Yokohama Fenders" or "Yokohama type fenders".
In market, many China's suppliers call its pneumatic fenders as "Yokohama Type Pneumatic Fenders". But it's not the real "Yokohama Type Pneumatic Fenders". The pneumatic fenders Made in China have the big different with the Evergreen Maritime Yokohama pneumatic fenders.
Advantages of Yokohama Pneumatic Fenders
Evergreen Maritime Yokohama Pneumatic Fenders cover all the advantages of general pneumatic rubber fenders. Meanwhile, Yokohama pneumatic fenders have its own advantages as below.
Toughest Tire Net
Evergreen Maritime Yokohama Pneumatic Fenders equip the heavy-duty aircraft tire. This design is more tough than the general Chinese truck tire net.
Stronger Fender Wall
Evergreen Maritime Yokohama Fenders are manufactured comply with the material requirements of ISO 17357 completely. Just the conformation orally. And manufactured by model technology, which is different with general Chinese pneumatic fenders.
Easy to Transport and storage
Evergreen Maritime Yokohama Pneumatic Fenders can be deflated completely, easy to storage. The big size pneumatic fenders over 2.5m diameters can be loaded into the normal container easily to save shipment.
Type of Yokohama Pneumatic Fenders
Evergreen Maritime make Sling Type, Net Type, Hydro Type, Ribbed Type Yokohama Pneumatic Fenders. We also make other type pneumatic fenders upon the special request of customer.
All our Yokohama Pneumatic Fenders are manufactured and tested comply with ISO 17357: 2002.
3.3× 6.5m Yokohama Type Pneumatic Fenders with tire net
Pressure requirements of floating pneumatic rubber fenders
Evergreen-Maritime make floating pneumatic rubber fenders with 50kPa (pneumatic 50) and 80kPa (pneumatic 80) initial pressure. The internal pressure, endurable pressure, safety-valve setting pressure and hydraulic test pressure are also in compliance with the requirements of ISO 17357: 2002.
Test and Inspection for Commercial Floating Pneumatic Rubber Fenders
Acceptance testing and inspection for purchased floating pneumatic rubber fenders shall be based on the tests and inspections indicated below:
Material test of rubber — Conducted in accordance with the Physical properties of inner and outer rubber required by ISO 17357: 2002
Dimensional inspection — Shall be inspected at the initial internal pressure. Tolerance: +10%, -5%.
Air-leakage test — Shall be conducted at initial pressure for more than 30 min
Hydrostatic-pressure test — Shall be performed for 10 min at the hydrostatic pressure shown in "test pressure at 0% deflection". Maximum temporary elongation: 10%
Floating Pneumatic Rubber Fender Performance
The performance of floating pneumatic rubber fenders shall be specified in terms of Guaranteed Energy Absorption (GEA), Reaction Force at GEA deflection, and Hull Pressure at GEA deflection.
All Evergreen Maritime floating pneumatic rubber fenders are manufactured and third party (ABS, LR, BV, CCS) certified in compliance with ISO 17357: 2002.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}